Industrial Commercial Supplies in Greenville

Southwire^® 6AWG Solid Bare Ground Wire

Ideal to be used for grounding grid systems in residential electrical systems before entering the home.

Mobile home feeder consists of 4 quadruplexed type RHH or RHW-2 or USE-2 AlumaFlex A-8000 series aluminum alloy compacted conductors. The cable contains a triple extruded white striped neutral conductor and a solid green jacketed grounding conductor. Insulation is sunlight-resistant. Mobile home feeder is intended for the connection of mobile homes to a supply of electricity where permanent wiring is required as specified in the National Electrical Code. It is suitable for direct burial at temperatures not to exceed 90 degrees Celsius. Voltage rating is 600 volts. UL (Underwriter's Laboratories) listed.

Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon jacketed conductors with ground (WG). Flame-retardant and crush-resistant. UL (Underwriter's Laboratories) listed.

Aluminum conductors, polyethylene insulation. Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts. UL (Underwriter's Laboratories) listed.

Sometimes know as ethernet or LAN cable. It has 4 twisted wire pairs to prevent internal crosstalk, XT, and crosstalk to external wires, AXT. It uses 1.5-2 twists per centimeter. Can be used commercially or residentially.

Schedule 40 size drain, waste, and vent. NSF listed, ASTM F-891standard. Cellular core pipe offers the advantages of lighter weight, lower water noise, easier to cut and saw, higher tensile and impact strength. Same I.D. and O.D. dimensions as solid PVC Schedule 40 DWV pipe. Rated for DWV use only.

SharkBite PEX is cross-linked polyethylene tubing best suited for potable water supply applications and is strong, durable, flexible, and corrosion-resistant so that it may be used either indoors or buried directly outdoors. SharkBite PEX features a repeating SharkBite imprint pattern that provides a visual aid to help you determine whether the tube has been fully inserted when using the SharkBite push-fit fitting range. Flexibility reduces the number of fittings needed to complete a job, reducing cost. Installation is easy in either wet or dry conditions and allows immediate pressure testing. SharkBite PEX, which matches copper pipe sizes, allows a variety of connection options including SharkBite push-to-connect fittings, brass barbed fittings, or poly-alloy barbed fittings. Manufactured to meet or exceed requirements of ASTM F877-2011a, CSAB137.5-2009, and NSF/ANSI 63. Pressure ratings: 160 psi @ 73 F, 100 psi @ 180 F, 80 psi @ 200 F. Available with red, white, and blueprint lines for the simple identification of cold water, hot water, and main water lines.

PEX A Sleeves. Expansion sleeve which slips onto PEX A pipe and after expansion compresses around PEX A fitting to secure it into the pipe. For use with cold expansion PEX A pipe and sleeve system. Compatible with Uponor (Wirsbo) ProPEX piping systems (ProPEX is a trademark of Uponor). ASTM F1960.

Expansion PEX A TEE. Type A. Poly alloy. For use with cold expansion PEX A pipe and sleeve system. Compatible with Uponor (Wirsbo) ProPEX piping systems (ProPEX is a trademark of Uponor). ASTM F1960.

Electric water heater, dual 4500W, 240V elements, 3" insulation, .95 Energy Factor. T & P valve, PEX polymer-lined heat trap nipples. PEX dip tube, glass-lined tank, anode rod. 6-year tank & parts warranty. Meets new NAECA 2015 Efficiency Standards.